Time Tracking Report: 11-17 Jan 2021

Time tracker duration per day 11 17 jan 2021
Time tracker tracked duration 11 17 jan 2021
Time tracker top 10 tasks 11 17 jan 2021
Time tracker top tracked days 11 17 jan 2021

Comments

Post a Comment

Popular posts from this blog

Call Forward And Call Hunt on CUCM

Image
Call forwarding is one of the features of the call coverage in Cisco CUCM. Call Hunting is when CUCM distributes a call on more than one Directory Number (DN), whether consecutively or simultaneously, depending on the algorithm. Hunt Pilot A Hunt Pilot is the entry point for the whole call hunting process. It is hit by a Call. The Hunt Pilot number is a dialable entity and has many similarities with Route Patterns : We can configure Route Filters with Hunt Pilots, Hunt Pilots can Provide Outside Dial Tone , We can set Hunt Pilots with the Urgent Priority flag, They can route or block calls, They can apply Calling and Called Party Transformations. Hunt Lists After hitting the Hunt Pilot, the call is presented by CUCM to the Hunt List. Each Hunt List contains one or more ordered Line Groups. A Hunt List can be pointed by one or more Hunt Pilots. Line Groups Each Line Group contains one or more member (we’ll refer to them as Hunt members, hunt parties or Line Group members). A Line Grou...
Read more

En Bloc Dialing vs Digit-By-Digit Dialing

Image
Digit Signaling, aka Digit Addressing, is the method by which digits are sent from a dialing endpoint (e.g. phone) to a CUCM server, or by a voice gateway or trunk. There are three known digit signaling methods: En Bloc dialing SIP Dial Rules Digit-by-digit dialing 1. En Bloc digit dialing In the En Bloc digit signaling method, digits are sent as a whole block. Think of it like a brick that you send to UCM. This is the digit addressing method used on Type A Cisco phones, whether the endpoint signaling protocol is SIP or SCCP. En Bloc dialing is the default method used with the famous gateway protocols -MGCP, H323 and SIP- and also on H323 trunks and SIP trunks. Besides, the resulting pattern of a Translation Pattern operation is sent as En bloc to the call control system. 2. SIP Dial Rules It is important to know that all SIP phones support SIP dial rules, whether they are Type A or Type B. SIP dial rules are created on CUCM and downloaded by...
Read more

IOS Commands To Verify Voice Ports

Image
show voice port “show voice port” displays verbose information about all the voice ports on a voice gateway. Let’s examine “show voice port” on a E1 PRI gateway: On this gateway, we have two E1 PRI trunks, thus two voice ports. Each voice port is in the form “slot/subunit/port:signaling channel”. In the table that comes after each displayed voice port, we have 31 lines. These are the available channels on each PRI link. Notice that the column “CH” refers to timeslot, and not the channel. The 16th timeslot carries the 15th channel, which is the signaling channel (D channel). show voice port summary This command lists the voice ports and their timeslots combined into one table.  
Read more